FPQ4-35/6T20绝缘子

关键字: FPQ4-35/6T20绝缘子复合针式绝缘子

生产厂家: 苏州工业园区万联电器有限公司

本公司各种类型高压线路用复合绝缘子,型号齐全.主要包括:复合针式绝缘子,复合支柱绝缘子,复合悬式绝缘子,复合耐张绝缘子串, 横担式复合绝缘子, 铁路用复合绝缘子,防风偏复合绝缘子,以及出口外贸类型复合绝缘子,欢迎采购!

fpq4-10/3t

fpq4-10/3.0

FPQ4-35/6T20绝缘子

fpq4-10/3t18

fpq4-10/3t20

fpq4-10/4t

fpq4-10/4.0

fpq4-10/4t16

fpq4-10/4t18

fpq4-10/4t20

fpq4-10/5t

fpq4-10/5.0

fpq4-10/5t16

fpq4-10/5t18

一.   FPQ4-35/6T20绝缘子概述

高压线路复合针式绝缘子具有很高的抗弯曲，抗扭强度，抗冲击性、抗震性和防爆性能优越。内绝缘**、重量轻、易安装，是传统针式瓷绝缘子的理想换代产品.

二.   FPQ4-35/6T20绝缘子特点:

1、结构简单；

2、耐污性能好，硅橡胶材料的憎水性、迁移性、恢复性，并且在绝缘子表面积污后可以迁移到污层表面；

3、制 造工艺简单；

4、重量轻、运输方便；

5、性价比高；

6、维护人力少、*；

7、抗冰害能力强；

8、高机械强度等级*实现。

1, the structure is simple;

2, pollution tolerance, the hydrophobicity of HTV silicone rubber, mobility, recovery, and on the insulator surface pollution can migrate to the surface of contaminated;

3, has the advantages of simple manufacturing process;

4, light weight, convenient transportation;

5, high performance price ratio;

6, less maintenance, low cost of human;

7, strong ability of anti icing;

8, high mechanical strength is easy to realize.

三.   FPQ4-35/6T20绝缘子技术参数

四. FPQ4-35/6T20绝缘子安装注意事项

(1)绝缘子应轻拿、轻放避免与铁件、工具等尖硬物摩摖碰撞。

(2)产品起吊时,绳结要打在端部附件上,严禁打在伞群或护套上,绳子**碰及伞群与护套部分时,应在接触部分用软布包裹。

(3)严禁脚踩绝缘子伞群。

(4)不得将复合绝缘子当做放线的辅助工具,以免使其受到冲击力或弯曲而损伤绝缘子。

(5)安装均压环时,应注意调整均压环与轴线垂直安装,对于开口型均压环,应注意两端开口方向一致,有利于放电和保护伞群。

(1) insulators should be light, with care to avoid collision with the iron parts, tools and other sharp hard object friction 摖.

(2) the product when lifting, knot to play in the end fittings, it is strictly prohibited to play in the umbrella group or sheath, the rope must be touching the umbrella group and the jacket part, should be in contact with a soft cloth wrapped.

(3) is strictly prohibited on the insulator umbrella group.

(4) shall not be used as auxiliary tool for composite insulator on line, so as to avoid the impact force or bending and damage the insulator.

(5) installing equalizing ring, should pay attention to adjust the equalizing ring and the vertical axis is installed, equalizing ring for open type, should pay attention to both ends open direction, is conducive to the discharge and the umbrella group.

五. FPQ4-35/6T20绝缘子订购须知：

(1)、如夹线范围不符，请在订货时注明； 

(2)、常规配压线板，如不需要，请注明；

(3)、如选用节能型跨径压板（工程塑料材质），订货时请在型号后加“J”。

(1), such as wire clamping range does not match, please specify when ordering;

(2), normal pressure plate, if not required, please specify;

(3), such as the use of energy saving span plate (plastic material), please add "J in type".